+
  • APD-Photodetector-Preamplifier-Assembly1.jpg
  • APD-Photodetector-Preamplifier-Assembly2(1758528686240).jpg

APD Photodetector Preamplifier Assembly

Model:

Classification:

Keyword: dynamo,Water pump series

message

Product Introduction

Characteristics

Active area: Φ0.8/4mm

Spectral response range: 400nm~1100nm

High responsivity: ≥1.0×10⁵V/W

Integrated temperature sensor

Bright background resistance, electromagnetic interference resistance

Applications

Laser ranging

 

Other photoelectric detection

Spectral Response (M=100; 23℃)

APD Photodetector Preamplifier Assembly

Absolute Maximum Ratings

Product Model Positive Power Supply Voltage (V) Negative Power Supply Voltage (V) Bias Voltage (V) Operating Temperature (℃) Storage Temperature (℃)
Φ0.8 +6 -6 200~350 -40~+70 -50~+100
Φ4 +15/+5.5 -15/-5.5 -200~-350 -40~+60 -50~+85

Technical Specifications@ 23℃

Φ0.8 Technical Indicators (EVM2101-2)

Chip Size (mm) Responsivity Re(V/W) Rise Time Tr(ns) Fall Time Tf(ns) Max. Output Umax(V) Dark Noise RMS VNrms(mV) Output Pulse Width τn (ns) Temperature Sensitive Diode Room Temperature Voltage (mV) Pulse Polarity Temperature Sensitive Diode Temperature Coefficient (mV/℃)
Φ0.8 ≥1.4x105 ≤10 ≤10 1.5 ≤1.0 20 750 Positive -1.8
Note: Test conditions for items in the table: λ=1064nm, τ=20ns, f=10kHz, Vcc=±5V

Φ4 Technical Indicators (ETMB404-2)

Chip Size (mm) Responsivity Re(V/W) C1 Control Multiple C2 Control Multiple Dark Noise Peak-to-Peak Value Vnp-p (mV) Output Pulse Width τn (ns) Temperature Measurement Range (℃) Temperature Sensor Factor (mV/℃) Temperature Sensor Room Voltage (mV) Pulse Polarity
Φ4 ≥3.0x105 15±3 15±3 ≤15 300~800 -40~60 10±2 750±20 Negative
Note: Test conditions for items in the table: λ=1064nm, τ=20ns, f=10kHz, Vcc=±12V

Overall Dimensions, Pin Arrangement and Definitions

Φ0.8 (TO-8) Overall dimensions and pin arrangement

APD

Pin1: Signal output (Vout)

Pin2: Floating (NC)

Pin3: Preamplifier negative power voltage (Vss)

Pin4: Bias voltage (VR)

Pin5: Floating (NC)

Pin6: Case

Pin7: Ground (GND)

Pin8: Temperature sensitive diode anode (A)

Pin9: Temperature sensitive diode cathode (C)
Pin10: Ground (GND)

Pin11: Floating (NC)

Pin12: Preamplifier positive power voltage (Vcc)

Φ4 (TO-25) Overall dimensions and pin arrangement

APD

Pin1: Bias voltage (VAPD)

Pin2: Third quadrant output (Vout3)

Pin3: Floating (NC)

Pin4: Preamplifier gain control (C2)

Pin 5: Second quadrant output (Vout2)

Pin6: Preamplifier negative power voltage (Vss)

Pin7: Ground (GND)

Pin8: Preamplifier positive power voltage (Vcc)

Pin9: First quadrant output (Vout1)

Pin10: Temperature sensor output (Ts)

Pin11: Sampling gain control (C1)

Pin12: Fourth quadrant output (Vout4)

Pin 13: Floating (NC)

Application Recommendations

Please pay attention to electrostatic protection to avoid damaging the device

Do not exceed the maximum rated values of all parameters during use

When installing and soldering pins of this product, strictly follow the product pin definitions for assembly, soldering temperature TH (10s): 300℃

Leave a message online

Please leave your information so that we can get in touch with you faster and better!


Submit

Note: Items marked with * are mandatory, thank you!