+
  • APD-Photodetector-Preamplifier-Assembly.jpg

APD Photodetector Preamplifier Assembly

Model:

Classification:

Keyword: dynamo,Water pump series

message

Product Introduction

Characteristics

Photosensitive area: Φ110/200/500μm

Spectral response range: 900nm~1700nm

High responsivity

High detection sensitivity

Fast response speed

Applications

Laser ranging

Laser communication

Other photoelectric detection

Spectral Response (M=10; 23℃)

APD

Absolute Max. Ratings

Power Consumption Positive Power Supply Voltage (V) Negative Power Supply Voltage (V) Operating Bias Voltage (V) Operating Temperature (℃) Storage Temperature (℃)
250mW +5.5 -5.5 66 -40~+70 -50~+100

Technical Specifications @23℃

Φ110μm Technical Indicators (Typical Values) (ETIMB101-1)

Photosensitive Area Size (μm) Responsivity Re(V/W) Rise Time Tr(ns) Fall Time Tf(ns) Max. Output Umax(V) Dark Noise RMS VNrms(mV) Bandwidth BW (MHz) Operating Bias Range (mV) Pulse Polarity Bias Voltage Temperature Coefficient (V/℃)
Φ110 120x103 4.0 4.1 1.2 ≤1.1 85 26~66 Negative 0.12
Note: Some test conditions in the table: λ=1550nm, τ=100ns, f=10kHz, Vcc=±5V, M=10

Φ200μm Technical Indicators (Typical Values) (ETIMB101-4)

Photosensitive Area Size (μm) Responsivity Re(V/W) Rise Time Tr(ns) Fall Time Tf(ns) Max. Output Umax(V) Dark Noise RMS VNrms(mV) Bandwidth BW (MHz) Operating Bias Range (mV) Pulse Polarity Bias Voltage Temperature Coefficient (V/℃)
Φ200 340x103 5.6 5.8 1.55 ≤1.2 60 26~66 Negative 0.12
Note: Some test conditions in the table: λ=1550nm, τ=100ns, f=10kHz, Vcc=±5V, M=10

Φ500μm Technical Indicators (Typical Values) (EVIMB101-5)

Photosensitive Area Size (μm) Responsivity Re(V/W) Rise Time Tr(ns) Fall Time Tf(ns) Max. Output Umax(V) Dark Noise RMS VNrms(mV) Bandwidth BW (MHz) Operating Bias Range (mV) Pulse Polarity Bias Voltage Temperature Coefficient (V/℃)
Φ200 580x103 12 12 1.35 ≤1.4 29 26~66 Negative 0.12
Note: Some test conditions in the table: λ=1550nm, τ=100ns, f=10kHz, Vcc=±5V, M=10

Overall Dimensions, Pin Arrangement and Definitions

TO-8 Overall dimensions and pins

APD

Pin1: Signal output (Vout)

Pin2: Ground (GND)

Pin3: Negative power voltage (Vee)

Pin4: Bias voltage (VR)

Pin5: Floating (NC)

Pin6: Case (Case, GND)

Pin7: Floating (NC)

Pin8: Thermistor positive

Pin9: Thermistor negative

Pin10: Ground (GND)

Pin11: Floating (NC)

Pin12: Positive power voltage (Vcc)

Application Recommendations

Please pay attention to electrostatic protection to avoid damaging the device

Do not exceed the maximum rated values of all parameters during use

When installing and soldering pins of this product, strictly follow the product pin definitions for assembly, soldering temperature TH (10s): 300℃

Leave a message online

Please leave your information so that we can get in touch with you faster and better!


Submit

Note: Items marked with * are mandatory, thank you!